Dragon Conveyor                              Storch Material Handling

Dragon Conveyor

	Dragon Conveyor

How It Works: Contaminated Coolant is deposited into the infeed of the DRAGONTM conveyor and is then paddled along the horizontal infeed section.  Just prior to the incline sits an opening for coolant to flow down and underneath a Rare Earth Magnetic Chip Coolant Separator. Clean coolant goes right back into your tank. A moist Cake of “Swarf and Chips” are collected by the Magnetic Separator and are rotated back to the surface where the series of stainless steel paddles then slowly drags the cake up the incline and towards the discharge head allowing even more coolant to drain back towards the Magnetic Separator. This simple process requires no paper media.

Save Expensive Coolant & Increase Scrap Value
60% Less Coolant carryover in your scrap hopper compared to Beltless Magnetic and other traditional conveyors.

Stop Wasting Paper
The DRAGONTM Separates & Conveys Chips/Fines/Swarf down to 5-10 Micron - 98% efficiency with NO paper Media needed*.

Extend Your Existing Filter Bag Life by 10 Times
Existing systems with secondary bag filters can reduce consumption of bags by 980% or improve your filtering system to a whole new level by decreasing the micron filter size.

Ferrous Or Non-Ferrous Conveyance!
In addition to being one of the best options for Ferrous filtration, The DRAGONTM can handle non-ferrous chips with a small drop plate to bypass the magnetic separator.

40+ years of expertise in the Chip and Fine conveyance industry has lead Storch’s R&D team to this exciting break though in technology.  The DRAGONTM is the end result of integrating two existing Storch technologies (Drag-Flight Conveyor and Chip Coolant Separator) to create the ultimate ferrous pre-filter conveyor system.  Storch Offers 6 standard widths, up to 140 GPM capacities and over 1000 lbs per hour of chips/fines/swarf removal.

* Contaminated Coolant containing Cast Iron &/or Steel Chips, Fines or Swarf has an effective separation of 98% down to 15-20 Microns. Further Separation occurs down to 5-10 Microns at various lower percentages based on ferrous metal grade being machined, coolant or oil type and GPM rate.

Typical Applications:  Paper-Bed Media Filters, CNC Machining, Grinding & Lapping, CNC Turning, Vertical & Horizontal Milling

Please Click the quote forms below to view print, fill-in and fax or email

People who visited this page also visited these Storch Material Handling pages:

Tell us how we may help!

For Information or Quote, contact us by:

 Toll Free: (800) 959.0047

 Phone: (734) 591.2200